🛸
MoCap Clover
  • 🌎Introduction
    • Motion Capture System with Clover
  • Meet the team!
  • ⚙️Hardware
    • Motion Capture Setup: OptiTrack
      • Motive: The Basics
      • Camera Calibration
      • Marker Placement
      • Rigid Body Tracking and Data Streaming
  • 🛰️Data Transfer
    • Feeding Pose Data into ROS on Raspberry Pi
      • Network Topology and Raspberry Pi Configuration
      • VRPN ROS Package
      • ROS Network
    • Feeding Pose Data to PX4
      • EKF2 Configuration
      • LPE Configuration
      • Remapping Pose Data to PX4
      • EKF2 and LPE Tuning and Consistancy
  • 🚀Examples
    • Flight Tests
      • Offboard Control Overview
      • Complex Trajectory Tracking
        • MAVLink Interface Definitions
        • Code Details
        • Feedforward Simple Offboard
    • Auto-Tuning
      • Auto-Tune Parameter
  • 🤖Conclusions
    • Conclude MoCap Clover
  • 🚧Hardware in the Loop Simulations
    • HITL and SITL Background
    • PX4 Configuration Through QGC
    • Launching the Clover Simulator in HITL Mode for HITL Simulations
    • Configure Clover Platform
  • Miscellanous
    • Working with NatNet SDK
    • Feeding Pose Data into Matlab
Powered by GitBook
On this page
  1. Hardware
  2. Motion Capture Setup: OptiTrack

Motive: The Basics

Motive software basics.

PreviousMotion Capture Setup: OptiTrackNextCamera Calibration

Last updated 1 year ago

This section provides the reader with references to tutorial content around the Motive software allowing them to achieve a basic understanding.

Quick Start Resources

A quick start overview on installation and setup can be found in the first link, with more details on the second:

Visual Content

The visual learners can reference the following videos:

Motive: Installation and Activation

Motive: Panes and Layouts

Motive: Toolbars and Dropdowns

Motive: File Management

⚙️
  • Quick Start Resources
  • Visual Content
LogoQuick Start Guide: Getting StartedOptiTrack Documentation
LogoInstallation and ActivationOptiTrack Documentation